Type FS2.5 Fork Spreader
The type FS2.5 Fork Spreader has been designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber or plastic tubing etc. The Fork Spreader evenly distributes the load over its full length. This slip-on attachment is easily fitted onto the Lift Truck fork tines and is secured by a safety chain.
Fork Spreaders may be designed and manufactured to suit your application on request. Please also refer to the type FS3-LG Fork Spreader & Load Guard Product Specifications.
The standard finish on the type FS2.5 Fork Spreader is enamel painted over primed steel.
• Pocket size 160 x 60mm
• Pocket Centres 775mm
• Safe Working Load 2500kg
• Unit Weight 225kg
• HCG 320mm
Model Number: FS2.5
Product Name: Type FS2.5 mulit fork spreader forklift spreader bar
Pocket size:160 x 60mm
Pocket Centres: 775mm
Fork Pocket Size Width x Height: (19 x 6.4)cm
Safe Working Load: 2500kg
Unit Weight: 225kg
The FS2.5 Fork Spreader safely picks up extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting, timber, plaster tubing etc. The Type FS fork spreader evenly distributes the load over the length of the attachment. The slip-on attachment is secured to the lift truck by a safety chain.
Enamel paint Finish
Forklogic Forklift Attachments have been designed and manufactured in accordance with Australian Standards AS 2359.15.
* Capacity 2500kg at 600mm Load Centre
* Width 3.0m x 1.2m
* Unit Weight 225kg
* Pocket Size 160 x 60mm
* Pocket Centres 770mm